SERIES FR/SFR
SURFACE MOUNT and PLUG-IN
Highly Regulated
Hi Reliability
Isolated
Ultraminiature DC-DC Converters
Low Profile .5" x 1" x .3" ht. up to 1 Watt
No Heat Sink or Electrical Derating Required
This series of encapsulated converters come in 60 different models. The highly regulated output is isolated from the input. The units will
operate over the temperature range of -25 C to +70 C. No heat sink is required. These units are excellent for applications where the input
voltage varies ±10% and the output must be held to ±0.1% single/and ±0.2% dual. The output voltage is maintained to within 0.2% from no
load to full load for single and 0.4% for dual.
OPTIONS AVAILABLE
Per Mil. Std. 883
Expanded operating temp (-55 C to +85C)
Stabilization Bake (125 C ambient)
Temperature Cycle (-55 C to +125 C)
Hi Temp, full power burn in (100% power, 125 C case temp)
FEATURES
Excellent voltage regulations ±0.1% single / ±0.2% dual
Encapsulated semiconductors, conservatively rated for maximum reliability
Excellent load regulations 0.2% single / 0.4% dual
Up to 1.0 watts output power at 70 C ambient
TYPICAL CHARACTERISTICS:
Test conditions: 25 C ambient.
Output voltage tolerance:±1% single / ±2% dual
Line regulations: ±0.1% single/±0.2% dual (for the input
voltage range of ±10%)
Load regulation: 0.2% single/0.4% dual
Converter frequency: 20-40 KHz
Operating temperature: -25 C to +70 C ambient.
Output voltage temperature coefficient: 0.01%/C
Storage temperature: -55 C to +125 C
Isolation: 100 megohms minimum at 500 volts DC
Short circuit protection: Temporary
Page 1 of 8
SERIES FR/SFR SURFACE MOUNT and PLUG-IN
12/18/2007
http://www.picoelectronics.com/dcdclow/pe76.htm?PartNo=15FR15D