參數資料
型號: 101-0303
廠商: Rabbit Semiconductor
文件頁數: 60/126頁
文件大小: 0K
描述: SMARTSCREEN OP7100 DISPLAY
標準包裝: 1
系列: SBC
模塊/板類型: 單板計算機模塊,帶顯示器
適用于相關產品: 單板計算機
OP7100
Hardware
39
RX
TX
GND
RTS
CTS
DTR
RX
TX
GND
RTS
CTS
Modem
Side
OP7100
Side
Figure 3-18. Connections Between
Controller and Modem
A program sends data by writing characters into the transmit buffer. If the
serial port is not already transmitting, the write functions will automatically
initiate transmission. Once the last character of the buffer is sent, the
transmit interrupt is turned off. A high-level application can write data one
character at a time or in a string.
CTS/RTS Control
The Z180’s hardware constrains its Port 0 to have the CTS (clear to send)
pulled low by the RS-232 device to which it is talking. The OP7100 does
not support CTS for the Z180’s Port 1.
Modem Communication
Modems and telephone lines facilitate RS-232 communication across great
distances.
The Dynamic C RS-232 library supports communication with a Hayes Smart
Modem or compatible. The CTS, RTS and DTR lines of the modem are not
used. If the modem used is not truly Hayes Smart Modem compatible, tie the
CTS, RTS and DTR lines on the mo-
dem side together. The CTS and RTS
lines on the controller also have to
be tied together. A “NULL-modem”
cable is also required for the TX and
RX lines. A commercial NULL-mo-
dem cable would have its CTS and
RTS lines tied together already on
both sides.
Figure 3-18 shows the wiring for
connections between a modem and
the OP7100.
相關PDF資料
PDF描述
101-0383 MODULE RABBITCORE RCM2020
101-0435 MODULE RABBITCORE RCM2110
101-0453 MODULE RABBITCORE RCM2300
101-0494 MODULE RABBITCORE RCM2250
101-0518 MODULE RABBITCORE RCM3110
相關代理商/技術參數
參數描述
10103042SP 制造商:Pentair Technical Products / Hoffman 功能描述:HTR COMP 240V 25W W ADH TIES
1010-3-05-00-00-00-01-0 功能描述:電路板硬件 - PCB PRESS FIT WRAPOST RECPT 3 WRAPS RoHS:否 制造商:Harwin 類型:Shield Clip 長度:9.4 mm 螺紋大小: 外徑: 材料:Beryllium Copper 電鍍:Tin
1010-3-05-01-00-00-01-0 功能描述:電路板硬件 - PCB 200u SN/PB OVER NI 3 WRAPS RoHS:否 制造商:Harwin 類型:Shield Clip 長度:9.4 mm 螺紋大小: 外徑: 材料:Beryllium Copper 電鍍:Tin
1010-3-05-15-00-00-01-0 功能描述:電路板硬件 - PCB 10u AU OVER NI 3 WRAPS RoHS:否 制造商:Harwin 類型:Shield Clip 長度:9.4 mm 螺紋大小: 外徑: 材料:Beryllium Copper 電鍍:Tin
1010-3-05-21-00-00-01-0 功能描述:電路板硬件 - PCB 20u AU OVER NI 3 WRAPS RoHS:否 制造商:Harwin 類型:Shield Clip 長度:9.4 mm 螺紋大小: 外徑: 材料:Beryllium Copper 電鍍:Tin