
Specifications –––––––––––––––––––
Circuit
No.1
Connector outline
A±0.05
1±0.05
2.5
±
0.05
0
f 0.7 +0.1
Odd circuit number from 3 to 11 circuits.
: 6.7
Odd circuit number from 13 to 31 circuits.
: 7.2
11.9
3
1
CS FAMILYSERIES/CSRCSTCSCONNECTOR
1.0mm pitch/Disconnectable Insulation displacement connectors
This is a 1.0mm pitch insulation
displacement connector with the secure
locking structure to prevent coming off the
connector and incomplete mating. 1.8A in
rated current was realized by using AWG#27.
CS connector
Secure locking structure
Realization of multi-circuits by low insertion
force
Countermeasure for unexpected prying
insertion
TCS connector
Secure locking structure
Countermeasure for unexpected prying
insertion
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
CSR CS connector
TCS connector
Initial value/25m
max.
After environmental
testing/50m
max.
–
0.8 to 2.0mm
1.8A (AWG #27)
50V AC, DC
-25°C to +85°C (including temperature rise)
Initial value/15m
max.
After environmental
testing/30m
max.
500M
min.
500V AC/minute
UL11079, UL3619
AWG#27, #28
Conductor / 7-strands,
tincoated annealed copper
Insulation O.D. / 0.65 to
0.73mm
(Contact JST for details.)
–
1.6mm
–
Current rating
Series
Item
Voltage rating
Temperature rise
Contact
resistance
Insulation resistance
Withstanding voltage
Applicable
wire
Applicable PC board thickness
Applicable panel thickness
Odd circuit number from 3 to 11 circuits.
: 7.4
Odd circuit number from 13 to 31 circuits.
: 7.9
22.7
D
±0.05
5
±
0.05
6.1
±
0.05
E+0.1
0
Panel hole dimensions
(Applicable panel thickness: t=0.8 to 2.0mm)
Note: 1. Tolerances are non-cumulative:
±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method.
The dimensions above should serve as a guideline. Contact JST for details.
Note: D, E dimensions: Refer to TCS connector
(Unit for wire-to-wire connection).
CS connector
CSR TCS
CSR CS
TCS connector
PC board layout (viewed from component side) and Assembly layout