231
CHAPTER 13 8-BIT A/D CONVERTER (
μ
PD780024, 780024Y SUBSERIES)
(6) ANI0 to ANI7 pins
These are eight analog input pins to input analog signals to undergo A/D conversion to the A/D converter. ANI0
to ANI7 are alternate-function pins that can also be used for digital input.
Cautions 1. Use ANI0 to ANI7 input voltages within the specification range. If a voltage higher than
AV
REF
or lower than AV
SS
is applied (even if within the absolute maximum rating range), the
conversion value of that channel will be undefined and the conversion values of other
channels may also be affected.
2. Analog input (ANI0 to ANI7) pins are alternate function pins that can also be used as input
port (P10 to P17) pins. When A/D conversion is performed by selecting any one of ANI0
through ANI7, do not execute any input instruction to port 1 during conversion. It may cause
the lower conversion resolution.
When a digital pulse is applied to a pin adjacent to the pin in the process of A/D conversion,
A/D conversion values may not be obtained as expected due to coupling noise. Thus, do
not apply any pulse to a pin adjacent to the pin in the process of A/D conversion.
(7) AV
REF
pin
This pin inputs the A/D converter reference voltage.
It converts signals input to ANI0 to ANI7 into digital signals according to the voltage applied between AV
REF
and
AV
SS
.
Caution
A series resistor string of approx. 10 k
is connected between the AV
REF
pin and AV
SS
pin.
Therefore, when the output impedance of the reference voltage is too high, it seems as if the
AV
REF
pin and the series resistor string are connected in parallel. This may cause a greater
reference voltage error.
(8) AV
SS
pin
This is the GND potential pin of the A/D converter. Always keep it at the same potential as the V
SS0
pin even
when not using the A/D converter.
(9) AV
DD
pin
This is the A/D converter analog power supply pin. Always keep it at the same potential as the V
DD0
pin even
when not using the A/D converter.