參數資料
型號: SAB-XC167CI-16F20F
廠商: INFINEON TECHNOLOGIES AG
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP144
封裝: 0.50 MM PITCH, PLASTIC, TQFP-144
文件頁數: 36/80頁
文件大?。?/td> 2477K
代理商: SAB-XC167CI-16F20F
XC167
Derivatives
Functional Description
Data Sheet
37
V1.1, 2003-06
Preliminary
3.10
A/D Converter
For analog signal measurement, a 10-bit A/D converter with 16 multiplexed input
channels and a sample and hold circuit has been integrated on-chip. It uses the method
of successive approximation. The sample time (for loading the capacitors) and the
conversion time is programmable (in two modes) and can thus be adjusted to the
external circuitry. The A/D converter can also operate in 8-bit conversion mode, where
the conversion time is further reduced.
Overrun error detection/protection is provided for the conversion result register
(ADDAT): either an interrupt request will be generated when the result of a previous
conversion has not been read from the result register at the time the next conversion is
complete, or the next conversion is suspended in such a case until the previous result
has been read.
For applications which require less analog input channels, the remaining channel inputs
can be used as digital input port pins.
The A/D converter of the XC167 supports four different conversion modes. In the
standard Single Channel conversion mode, the analog level on a specified channel is
sampled once and converted to a digital result. In the Single Channel Continuous mode,
the analog level on a specified channel is repeatedly sampled and converted without
software intervention. In the Auto Scan mode, the analog levels on a prespecified
number of channels are sequentially sampled and converted. In the Auto Scan
Continuous mode, the prespecified channels are repeatedly sampled and converted. In
addition, the conversion of a specific channel can be inserted (injected) into a running
sequence without disturbing this sequence. This is called Channel Injection Mode.
The Peripheral Event Controller (PEC) may be used to automatically store the
conversion results into a table in memory for later evaluation, without requiring the
overhead of entering and exiting interrupt routines for each data transfer.
After each reset and also during normal operation the ADC automatically performs
calibration cycles. This automatic self-calibration constantly adjusts the converter to
changing operating conditions (e.g. temperature) and compensates process variations.
These calibration cycles are part of the conversion cycle, so they do not affect the normal
operation of the A/D converter.
In order to decouple analog inputs from digital noise and to avoid input trigger noise
those pins used for analog input can be disconnected from the digital IO or input stages
under software control. This can be selected for each pin separately via register P5DIDIS
(Port 5 Digital Input Disable).
The Auto-Power-Down feature of the A/D converter minimizes the power consumption
when no conversion is in progress.
相關PDF資料
PDF描述
SAB16C450-N 1 CHANNEL(S), 512K bps, SERIAL COMM CONTROLLER, PQCC44
SAB16C450-P 1 CHANNEL(S), 512K bps, SERIAL COMM CONTROLLER, PDIP40
SAB80186-1-N 16-BIT, 10 MHz, MICROPROCESSOR, PQCC68
SAB80186-N 16-BIT, 8 MHz, MICROPROCESSOR, PQCC68
SAB8032B-20-N 8-BIT, 20 MHz, MICROCONTROLLER, PQCC44
相關代理商/技術參數
參數描述
SAB-XC167CI-16F40F 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:16-Bi t Single-Chip Microcontroller Preliminary
SAC 制造商:TSC 制造商全稱:Taiwan Semiconductor Company, Ltd 功能描述:Low Capacitance Transient Voltage Suppressor Diodes
SAC 8250 制造商:Edsyn International 功能描述:Bulk
SAC+0107 制造商:AIM Metals & Alloys LP 功能描述:Solder Bar-2.5lbs. 制造商:AIM PRODUCTS LLC. 功能描述:Solder Bar-2.5lbs.
SAC01UPAK 制造商:Samson Technologies 功能描述:PODCASTING PACKAGE WITH CO1 MICROPHONE 制造商:Samson Technologies 功能描述:Podcasting Package with C01U Microphone