- 您現在的位置：買賣IC網 > PDF目錄358959 > LTST-C193TBKT-5A (LITE-ON ELECTRONICS INC) LTST-C193TBKT-5A PDF資料下載
參數資料
| 型號： | LTST-C193TBKT-5A |
| 廠商： | LITE-ON ELECTRONICS INC |
| 元件分類： | LED |
| 英文描述： | LTST-C193TBKT-5A |
| 中文描述： | SINGLE COLOR LED, BLUE, 1.15 mm |
| 封裝： | GREEN, PLASTIC PACKAGE-2 |
| 文件頁數： | 9/11頁 |
| 文件大?。?/td> | 762K |
| 代理商： | LTST-C193TBKT-5A |
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-On Only
Part No. : LTST-C193TBKT-5A
Page : 9 of 11
BNS-OD-C131/A4
CAUTIONS
1. Application
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance
for information on applications in which exceptional reliability is required, particularly when the failure
or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation,
traffic control equipment, medical and life support systems and safety devices).
2. Storage
The storage ambient for the LEDs should not exceed 30°C temperature or 70% relative humidity.
It is recommended that LEDs out of their original packaging are IR-reflowed within one week.
For extended storage out of their original packaging, it is recommended that the LEDs be stored in a
sealed container with appropriate desiccant, or in a desiccators with nitrogen ambient.
LEDs stored out of their original packaging for more than a week should be baked at about 60 deg C
for at least 24 hours before solder assembly.
3. Cleaning
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.
4. Soldering
Recommended soldering conditions:
Reflow soldering
Wave Soldering
Soldering iron
Pre-heat
Pre-heat time
Peak temperature
Soldering time
5. Drive Method
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be incorporated
in the drive circuit, in series with each LED as shown in Circuit A below.
120~150°C
120 sec. Max.
240°C Max.
10 sec. Max.
Pre-heat
Pre-heat time
Solder wave
Soldering time
100°C Max.
60 sec. Max.
260°C Max.
10 sec. Max.
Temperature
Soldering time
300°C Max.
3 sec. Max.
(one time only)
Circuit model A
Circuit model B
LED
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
of those LEDs.
6. ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED.
Suggestions to prevent ESD damage:
Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling.
LED
相關PDF資料 |
PDF描述 |
|---|---|
| LTST-C195KGJRKT | Dual color chip LED |
| LTST-C230KSKT | Compatible with Infrared and Vapor phase reflow solder process |
| LTST-C230TBKT | LITE-ON ELECTRONICS, INC. |
| LTST-C930CKT | Compatible with infrared and vapor phase reflow solder process |
| LTST-C930KGKT | LITE-ON TECHNOLOGY CORPORATION |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LTST-C193TBKT-AC | 制造商:LITEON 功能描述:Blue LED |
| LTST-C193TBKT-AS | 制造商:Lite-On Semiconductor Corporation 功能描述:LED BLUE SMD 0603 |
| LTST-C193TBKT-SA | 制造商:LITEON 制造商全稱:Lite-On Technology Corporation 功能描述:Property of Lite-On Only |
| LTST-C193TBKT-TD | 制造商:Lite-On Semiconductor Corporation 功能描述:Top View0603, color:Blue, |
| LTST-C193TBKT-WH | 制造商:Lite-On Semiconductor Corporation 功能描述:LED LAMP,Blue,56mcd@IF=5mA, SM |
發布緊急采購，3分鐘左右您將得到回復。