參數資料
型號: DS3148N
廠商: Maxim Integrated Products
文件頁數: 59/89頁
文件大小: 0K
描述: IC 8CH DS3/3 FRAMER 349-BGA
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 1
控制器類型: DS3/E3 調幀器
接口: LIU
電源電壓: 3.135 V ~ 3.465 V
電流 - 電源: 640mA
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 349-BGA 裸露焊盤
供應商設備封裝: 349-HCBGA(27x27)
包裝: 托盤
DS3146/DS3146/DS31412 6-/8-/12-Channel DS3/E3 Framers
62 of 89
Register Name:
RHDLC1
Register Description:
Receive HDLC FIFO Data
Register Address:
5Ch
Bit #
7
6
5
4
3
2
1
0
Name
D7
D6
D5
D4
D3
D2
D1
D0
Default
Note: After the RHDLC2 register is read, the receive FIFO read pointer advances and both the RHDLC1 and RHDLC2 registers are updated
with the next data/status from the receive FIFO. The host processor should read RHDLC1 first to retrieve the FIFO data and then immediately
read RHDLC2 to retrieve the associated FIFO status bits.
Bits 0 to 7: Receive FIFO Data (D[7:0]). These bits contain the next byte of receive FIFO data. D0 is the LSB and
is the first bit received by the framer, while D7 is the MSB and is the last bit received. Reading this register does
not cause the receive FIFO read pointer to advance.
Register Name:
RHDLC2
Register Description:
Receive HDLC FIFO Status
Register Address:
5Dh
Bit #
7
6
5
4
3
2
1
0
Name
N/A
PS1
PS0
CBYTE
OBYTE
Default
Bit 0: Opening Byte Indicator (OBYTE). This bit is set to 1 when the RHDLC1 register contains the first byte of an
HDLC packet.
Bit 1: Closing Byte Indicator (CBYTE). This bit is set to 1 when the RHDLC1 register contains the last byte of an
HDLC packet, whether the packet is valid or not. The host processor can check the PS[1:0] bits to determine
packet validity.
Bits 2, 3: Packet Status (PS[1:0]). These bits are only valid when the CBYTE bit is set to 1. These bits indicate
the validity of the incoming packet and the cause of the problem if the packet was received in error.
PS[1:0]
PACKET STATUS
REASON FOR INVALID RECEPTION OF THE PACKET
00
Valid
01
Invalid
Corrupt CRC
10
Invalid
Incoming packet was either too short (less than 4 bytes including the CRC)
or did not contain an integral number of octets
11
Invalid
Abort sequence detected
Packets fewer than four bytes long (including the FCS) are invalid and the data that appears in the FIFO in such
instances is meaningless. If only one byte is received between flags, then both the CBYTE and OBYTE bits are
set. If two bytes are received, then OBYTE is set for the first byte received and CBYTE is set for the second byte
received. If three bytes are received, then OBYTE is set for the first byte received and CBYTE is set for the third
byte received. In all of these cases, the packet status is reported as PS[1:0] = 10, and the data in the FIFO should
be ignored.
相關PDF資料
PDF描述
VI-24K-IX-S CONVERTER MOD DC/DC 40V 75W
PIC16C54C-20E/SO IC MCU OTP 512X12 18SOIC
PIC16C54C-04E/SS IC MCU OTP 512X12 20SSOP
PIC12C509T-04/SM IC MCU OTP 1KX12 8-SOIJ
PIC12C508T-04I/SM IC MCU OTP 512X12 8-SOIJ
相關代理商/技術參數
參數描述
DS315 制造商:Hubbell Wiring Device-Kellems 功能描述:SWITCH, DECO SER, 3W, 15A 120/277V, BR
DS3150 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:3.3V, DS3/E3/STS-1 Line Interface Unit
DS3150DK 功能描述:網絡開發工具 DS3150 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
DS3150G 功能描述:IC LIU T3/E3/STS-1 49-BGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:25 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:4.5 V ~ 5.5 V 安裝類型:通孔 封裝/外殼:16-DIP(0.300",7.62mm) 供應商設備封裝:16-PDIP 包裝:管件
DS3150GN 功能描述:IC LIU T3/E3/STS-1 IND 49-BGA RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器,接收器,收發器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:25 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:4.5 V ~ 5.5 V 安裝類型:通孔 封裝/外殼:16-DIP(0.300",7.62mm) 供應商設備封裝:16-PDIP 包裝:管件