電容器塑镕電容X2

1. MPX/MKX安規電容技術參數

（1）                        結構：MPX-X2是以聚丙烯膜為介質，金屬真空蒸發層（鋅鋁復合加厚型）為電極，用阻燃環氧樹脂和阻燃PBT塑殼封裝，以鍍錫銅包鋼線為引腳，常規腳長為15mm，也可根據客戶要求用長腳長或者切成短腳。
（2）                        應用范圍:跨線，抑制突波，交流等場合。比如打字機，顯示器，監控器，混合器，風扇，咖啡研磨機，排風機等
（3）                        特征：體積小，有良好治愈性，抗?jié)裥詮?qiáng)，耐過電壓性能優良。
（4）                        技術參數:
氣候條件：-40~+100℃
額定電壓：250VAC/280VAC
容量范圍：0.0022uF—4.7uF
容量偏差：J(±5%),K(±10%)
耐電壓DC：4.3UR或者2000VDC,極殼2000VAC(2S)
損耗角正切：＜1.0 uF時為≤0.0015（10KHz）；≥1.0 uF時為 ≤0.001（1KHz）
絕緣電阻：≥30000MΩ(C≤0.33uF); ≥10000S(MΩ·uF)（C＞0.33 uF）
（5）                        采用標準
UL1414,UL1283,EN60384-14,GB/T14472-1998,IEC60384-14
 
Interferon Suppression capacitors-Class X2 (CP Wires)
1.Structure
MPX-X2 series use polypropylene film as media,metalized vacuum evaporated layer with complexing jumbo-size Zinc and Aluminum as electrode,are enclosured by passive flammability epoxy resin and PBTpassive flammability plastic box which meet the requirements of UL94V-0 anduse CP wires as Leads.We can also redesign the length and shape of leads according to the customers’ requirements.
The MPX-X2 types are suitable for  across-the-line,antenna-coupling line-bypass and AC purpose and so on.
3.Features
The MPX-X2 types have small size with good self-healing effect.Having strong moisture resistance and well proof voltage.
4.Specifications
Climatic Conditions:-40℃～+100℃
Rated voltage:250VAC/280VAC
CapacitanceRange:0.0022 uF—4.7uF
Capacitance Tolerance:J(±5%),K(±10%)
Voltage Proof: 4.3 x UR or 2000VDC (Between the terminals) ,2000VAC (Between the electrode and outbox)(5S)
Insulation Resistance: C≤0.33uF, IR≥30000MΩ;C>0.33uF , IR*C≥10000S (1 minute at 20℃)
Dissipation Factor:C≤1.0uF DF≤0.0015(at 20℃10KHz) ; C>1.0uF DF≤0.001 (at 20℃,1KHz)