PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578, FAX (909) 363-7331
ProtektivePak.com
DRAWING NUMBER
37800
DATE:
11/06
TEK-MATE BOARD HANDLERS
2006 DESCO INDUSTRIES INC.
Employee Owned
SPECIFICATIONS FOR CORRUGATED MATERIAL:
Properties
Typical Values
Test Procedures/Method
Electrostatic Decay
0.01 seconds at 72°F and 11.8% R.H.
FED-STD-101, Method 4046
Surface Resistance
10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H.
for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer
ASTM D257
High-Voltage Discharge Resistance
Failure rate 0/5 (no oxide damage in five consecutive tests)
Rockwell International Test Report of December 20, 1991
Static Shielding
99.9% attenuation at 10kV; 99.6% attenuation at 30kV
EIA 541, appendix E, capacitive probe test
Charged Device Model (CDM) Safety
RTG >10E7 ohms at 86% R.H. or less
Rockwell International Test Report of December 20, 1991
Corrosivity
Contains 1-3 ppm reducible sulfur
FED-STD-101, Method 3005 for reducible sulfur
Sloughing Test
Negligible surface damage at 10 cycles and <5% of surface
ASTM D4060 at 70 rpm with CS-17 abrasive-coated
damage at 200 cycles in Taber Abrasion Test.
wheels and 1000 grams load
No conductive particles abrased from surface
Rockwell International Test Report of January 8, 1992
Recyclability
Complete recyclability of package
Rockwell International Test Report of January 8, 1992
Biodegradability
Biodegradation in or on moist soil
Volume Conductivity
Conductivity from wall to wall as well as across surface
Rockwell International Test Report of January 8, 1992
to assure permanence of the antistatic property
Shelf Life
Indefinite
Made in America
Features
Portable ESD worksurface that can also be used to
transport populated, unsoldered circuit boards
Static dissipative foam (RTT 10E6 - 10E8 ohms) laminated to
Protektive Pak impregnated corrugated material for greater
durability
Foam is shuntable, component leads can be kept at equipotential
and more stable when moved
Includes 10mm (3/8”) grounding snap
Static dissipative material 10E6 - 10E8 ohms
Buried shielding layer minimizes sloughing and rub-off contamination
Made in America
-----------------------------------------------
-------------------
W
L
Item No.
Size - L x W
Snap
37800
12 x 18
Male
39852
12 x 18
Female
37801
18 x 24
Male
39854
18 x 24
Female
SPECIFICATIONS FOR FOAM:
Property
Test Method
Results
Density
ASTM D3575-91
1.9 lb/ft3
Surface Resistivity
EOS/ESD DS111-1993
10E7 - 10E9 ohms/sq
Corrosivity
TS 1021BA (UK MOD)
Pass
Water Extract
TS 1021BA (UK MOD)
Pass
Total Chlorine
TS 1021BA (UK MOD)
Pass
Recommended Operating
Temperature Range
Internal
+200°F to -95°F
Tear Strength
ASTM D3575-91
14 lbf/in
Tensile Strength
ASTM D2575-91
44 psi
