16213

DESCO WEST:

PHONE (909) 627-8178 FAX (909) 627-7449

ONE COLGATE WAY, CANTON, MA 02021-1407

PHONE (781) 821-8370 FAX (781) 575-0172

December

2011

PM-78

Statfree B meets the minimum recommended worksurface requirement of ANSI/ESD S20.20 of <10E9 ohms. This extruded homogeneous

vinyl dissipative material can be used with either side up. One side has a smooth surface which is easy-to-clean and maintain, and the other has

a non-glare finish which makes it easier to identify small parts. Statfree B is easy to cut to configure to fit your requirements. The material is

dimensionally stable with minimum shrinkage or curling.

Statfree B has excellent color stability, minimizing discoloration. The 0.100" thick is a better value, providing a longer life and is ideal for general

purpose worksurface matting. The thinner 0.060" material is the economical choice, and is ideal for use on cafeteria-style trays.

RTG Resistance:

EOS/ESD S4.1

<10E9 ohms

RTT Resistance:

EOS/ESD S4.1

<10E9 ohms

Electrical Properties obtained by testing to industrial standards by an independent testing laboratory @ 100 Volts and 50% relative humidity unless

otherwise specified. Complete text of the test report is available upon request.

Construction:

Homogeneous extruded thermoplastic vinyl

Thickness:

0.100" (2.5mm) and 0.060" (1.5mm), nominal ±10%

Texture:*

Embossed one side/Smooth backside

Color:

Blue

Hardness:

80 shore A (ASTM D-2240)

Wear Resistance:

Negligible weight loss (750 cycles, Taber CS-17 Method)

*Color, texture, and gauge may vary between lots and mills

Grounding: This material must be properly grounded for optimum electrial performance. Ask for Technical Bulletin TB-2000 for mat grounding

instructions.

Cleaning: For optimum electrical performance, surface must be cleaned regularly using an ESD mat cleaner. We suggest using our Reztore

Surface & Mat Cleaner Item #10435 or Static-Wipes Item #10600. Do not use cleaners with silicone. Silicone buildup will create an insulative film

on the surface.

All statements, technical data, and recommendations

contained herein are based upon tests we believe to be

reliable. However, the accuracy or completeness thereof

is not guaranteed. The proper and correct applications

of products and data is the responsibility of the user.

Statements or recommendations not contained herein

shall have no force or effect unless embodied in a

written agreement signed by authorized officers of Desco

Industries, Inc.

Matting materials have a tendency to shrink slightly

when first unrolled. In applications where length is

critical, allow the material to relax for at least 4 hours

before cutting to size. Always trim with a sharp knife or

razor blade.

2011 DESCO INDUSTRIES INC.

Employee Owned

Made in the

United States of America

Desco warrants for one year that Statfree

matting products will be free of defects

in materials and workmanship and will

guarantee dissipative/conductive mat

properties for the life of the mat. Damage

to matting caused by misuse of any kind,

including using inappropriate cleaners is not

covered by Desco Limited Warranty.

RoHS Compliance Statement

None of the following materials are

intentionally added in manufacturing this

product: lead, mercury, cadmium, hexavalent

chromium, polybrominated biphenyls (PBB)

or polybrominated diphenyl ethers (PBDE) as

outlined in the Directive 2002/95/EC Article

4.1. See Desco Industries Inc. letter on-line at

Specifications and precedures subject to change without notice.

0.100" x 24" x 100'

0.100" x 30" x 40'

0.100" x 30" x 100'

0.100" x 36" x 40'

0.100" x 36" x 100'

0.100" x 48" x 40'

0.060" x 24" x 100'

0.060" x 30" x 100'

0.060” x 36” x 100’

0.060" x 48" x 100'

1 Benchmat, Statfree

B, size as specified

1 14213, common

point ground kit

24" x 36"

24" x 48"

Tolerances:

Width ± .250"

Length ± .250" every 1 linear foot of running material.

Worksurface mats meet required limits of ANSI/

ESD S20.20 tested per ANSI/ESD S4.1 and ESD

TR53.