- 您現在的位置：買賣IC網 > PDF目錄357616 > BH30PB1WHFV 3 V FIXED POSITIVE REGULATOR, PDSO5 PDF資料下載
參數資料
| 型號： | BH30PB1WHFV |
| 元件分類： | 固定正電壓單路輸出標準穩壓器 |
| 英文描述： | 3 V FIXED POSITIVE REGULATOR, PDSO5 |
| 封裝： | HVSOF-5 |
| 文件頁數： | 8/10頁 |
| 文件大?。?/td> | 371K |
| 代理商： | BH30PB1WHFV |
Technical Note
BH
□□
PB1WHFV Series
8/9
www.rohm.com
2009 ROHM Co., Ltd. All rights reserved.
2009.04 - Rev.A
0.01
0.1
1.0
100
1.0 m
10
100
Slow start capacitance Css (F)
起
S
Rss = 10 k
I
O
= no load
6. Overcurrent protection circuit
The IC incorporates a built-in overcurrent protection circuit that operates according to the output current capacity. This circuit
serves to protect the IC from damage when the load is shorted. The protection circuit is designed to limit current flow by not
latching in the event of a large and instantaneous current flow originating from a large capacitor or other component. These
protection circuits are effective in preventing damage due to sudden and unexpected accidents. However, the IC should not
be used in applications characterized by the continuous operation or transitioning of the protection circuits. At the time of
thermal designing, keep in mind that the current capability has negative characteristics to temperatures.
7. Actions in strong electromagnetic field
Use caution when using the IC in the presence of a strong electromagnetic field as doing so may cause the IC to malfunction.
8. Back Current
In applications where the IC may be exposed to back current flow, it is recommended to create a path to dissipate this
current by inserting a bypass diode between the VIN and VOUT pins.
VIN
Fig. 32 Example Bypass Diode Connection
9. I/O voltage difference
Using the IC in automatic switching mode when the I/O voltage differential becomes saturated (VIN - VOUT < 150 mV)
may result in a large output noise level. If the noise level becomes problematic, use the IC with the SEL pin in the high
state when the voltage differential is saturated.
10.GND Voltage
The potential of GND pin must be minimum potential in all operating conditions.
11. Preventing Rush Current
By attaching the Rss and Css time constants to the STBY pin, sudden rises in the regulator output voltage can be
prevented, dampening the flow of rush current to the output capacitors. The larger the time constant used, the greater the
resulting reduction. However, large time constants also result in longer startup times, so the constant should be selected
after considering the conditions in which the IC is to be used.
12. Regarding input Pin of the IC (Fig.34)
This monolithic IC contains P+ isolation and P substrate layers between adjacent elements in order to keep them isolated.
P-N junctions are formed at the intersection of these P layers with the N layers of other elements, creating a parasitic diode
or transistor. For example, the relation between each potential is as follows:
When GND > Pin A and GND > Pin B, the P-N junction operates as a parasitic diode.
When GND > Pin B, the P-N junction operates as a parasitic transistor.
Parasitic diodes can occur inevitable in the structure of the IC. The operation of parasitic diodes can result in mutual
interference among circuits, operational faults, or physical damage. Accordingly, methods by which parasitic diodes
operate, such as applying a voltage that is lower than the GND (P substrate) voltage to an input pin, should not be used.
Resistor
Pin A
STBY
GND
OUT
Back current
Fig.34
Transistor (NPN)
N
N
N
P
+
P
+
P
P substrate
GND
Parasitic element
N
N
P
+
P
+
P
P substrate
GND
Parasitic element
Pin B
C
B
E
N
GND
Pin A
Parasitic
element
Pin B
Other adjacent elements
E
B
C
GND
Parasitic
element
Fig. 33 VOUT Startup Time vs CSS Capacitance (Reference)
相關PDF資料 |
PDF描述 |
|---|---|
| BH33PB1WHFV | 3.3 V FIXED POSITIVE REGULATOR, PDSO5 |
| BISC-500-100 | INTERCONNECTION DEVICE |
| BISF-504-50 | INTERCONNECTION DEVICE |
| BISF-502-75 | INTERCONNECTION DEVICE |
| BISF-502-15 | INTERCONNECTION DEVICE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BH30PB1WHFV-TR | 功能描述:低壓差穩壓器 - LDO 3.0V CMOS LDO Regulator RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓（最大值）:307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20 |
| BH30RB1WGUT | 制造商:ROHM 制造商全稱:Rohm 功能描述:CMOS Type series regulator |
| BH30RB1WGUT-E2 | 功能描述:低壓差穩壓器 - LDO 3.0V CMOS LDO Regulator RoHS:否 制造商:Texas Instruments 最大輸入電壓:36 V 輸出電壓:1.4 V to 20.5 V 回動電壓（最大值）:307 mV 輸出電流:1 A 負載調節:0.3 % 輸出端數量: 輸出類型:Fixed 最大工作溫度:+ 125 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-20 |
| BH30SA3WGUT-E2 | 功能描述:Linear Voltage Regulator IC Positive Fixed 1 Output 3V 150mA VCSP60N1 制造商:rohm semiconductor 系列:- 包裝:剪切帶（CT） 零件狀態:Not For New Designs 穩壓器拓撲:正，固定式 電壓 - 輸出:3V 電流 - 輸出:150mA 電壓 - 跌落（典型值）:- 穩壓器數:1 電壓 - 輸入:最高 5.5V 電流 - 限制（最小值）:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:4-UFBGA，CSPBGA 供應商器件封裝:VCSP60N1 標準包裝:1 |
| BH30T | 制造商:Toshiba America Electronic Components 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。